Victron 1600 Watt Inverter
The Victron 1600 Watt 12 Volt Inverter is designed as a compact pure sine wave inverter to give you a nice clean ac output for sensitive electronics. The Victron 1600W 12V Inverter has a high peak power output and is designed with high efficiency for minimum power wastage. This Victron Inverter also has built in combined high frequency and line frequency technologies ensure the best of both worlds for the optimum in ac power output.
SinusMax – Superior engineering
The Victron 1600W 12 Volt Inverter was developed for professional duty, the Victron Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Victron’s 12 Volt 1600 Watt inverter employs hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power which is unique to the Victron Inverter range. Conventional high frequency technology does not offer such extreme performance. Victron phoenix inverters, however, are well suited to power up difficult loads such as computers and low power electric tools.
Power Distribution
Victron 1600 Watt 12 Volt Inverter virtually has unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
Transfer Load
To transfer the load to another AC source: If an automatic transfer switch is required we recommend using the Victron MultiPlus inverter/charger instead click here for link. The switch is included in these Victron Inverter Charger models and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Computer interface
All Victron Inverter models over 1000 Watt have an RS-485 port. All you need to connect to your PC is our MK2 interface. This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. A RS-232 to USB conversion cable is also available. Together with our VEConfigure software, which can be downloaded free of charge from Victrons website, all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems.
If you are looking for a top quality European designed and developed the 12 Volt Inverter then the Victron is the best choice for you.
*This Inverter requires to be hard wired – it does not have an AC power Socket.
Currently 12 Volt Technology has these on special for $1499.95 Saving you $399.95 Off Recommended Retail Price.
Looking for more outdoor 12 Volt products, visit: www.12volttechnology.com.au see a huge range of Marine, RV and outdoor 12 Volt Accessories.
Don’t miss out on any specials or promotional deals
Simply follow us on:
Make The Switch and go with 12 Volt Technology.
No comments:
Post a Comment